Super Joy Video Arcade Game System
So you bought the Super Joy Game, now what?.
 You
will need 4 BRAND NEW AA batteries. Don't use old ones.
Turn the controller upside down and press the latch below the battery pack
and remove it. Pop the cover off the battery pack where it says
"Open Here". Insert 4 BRAND NEW AA batteries in the
direction it shows in the battery pack (double check it) and carefully
snap the cover back on the battery pack. Insert the battery pack in
the controller and snap it in. It will only fit in one
direction. The hardest part is done.
Next,
hook the video and audio plugs up to your TV. The yellow should hook
to the video in jack and the white to the white audio in jack. If
you do not have video and audio inputs on your TV, you VCR will have
them. You will just need to switch the TV so that the VCR is showing
on the TV and then switch the VCR so that it is showing what is coming in
the input (see the VCR manual). Then plug the other end of the cable
into the Super Joy controller. Almost there! Push
the power switch on the Super Joy controller to ON. You should now
see the startup screen and in a couple seconds a list of
games.
Troubleshooting?
Did
you use Brand New batteries? Even if you did, try another set of
batteries. Dead batteries is the most common problem. Make
sure the power switch on the Super Joy controller is truned to the ON
position. Make
sure that the video/audio input on the TV or VCR is actually showing on
the TV screen. This is another really common problem. If you
have another device that you can use to test the input, try that.
Otherwise, take the Super Joy to another TV and try it.
|
